Chapter 5
5-29
Remote I/O Functions
Reference
The multi-function input monitor can be set together with the control I/O remote I/O function as a
default connection path in the Slave (Instance ID: 153 decimal (99 hex)). In addition, when a CS/CJ-
series DeviceNet (Master) Unit is being used, the multi-function input monitor can be used with other
remote I/O functions by allocating the following Instance to a COS connection.
Instance ID: 155 Decimal (9B Hex)
Byte number Bit 7 Bit 6 Bit 5 Bit 4 Bit 3 Bit 2 Bit 1 Bit 0
Wd M Right-
most
0 Input 7 Input 6 Input 5 Input 4 Input 3 Input 2 Input 1 Input 0
To Next Page
Loading...
