Chapter 10
10-24
Appendices
Writing performed once every six minutes is taken care by the EM.
10-2-13Equipment Manager Object: Class 97 Hex
■ Support Service Code
01
7E Detail Info 3 Reads the Operating Time
Monitor Flags.
First two bytes:
Number of bytes in the
rest of the array = 0001
Data byte:
Bit 0: Instance 01
Bit 1: Instance 02
Bit 2: Instance 03
Bit 3: Instance 04
Bit 4: Instance 05
Bit 5: Instance 06
(A flag will be set to “1”
when Class 97 Attribute
66 for the corresponding
Instance equals “01”.
--- 0001 00 Yes No Array
7F Detail Info 4 Reads the Lifetime Moni-
tor Flags.
First two bytes:
Number of bytes in the
rest of the array = 0003
Data byte 1: Input Termi-
nal Lifetime Flags
Bit 0: Instance 01
Bit 1: Instance 02
Bit 2: Instance 03
Bit 3: Instance 04
Bit 4: Instance 05
Bit 5: Instance 06
(A flag will be set to “1”
when Class 08 Attribute
67 for the corresponding
Instance equals “01”.
Data byte 2: Reserved
(00)
Data byte 3: Output Termi-
nal Lifetime Flags
Bit 0: Instance 01
Bit 1: Instance 02
Bit 2: Instance 03
(A flag will be set to “1”
when Class 09 Attribute
67 for the corresponding
Instance equals “01”.
--- 0003 00
00 00
Ye s N o A r r a y
Service code number (hex) Service
05 (Reset) Returns the Attribute’s data to initial values.
0E Get attribute single
10 Set attribute single
Instance Attribute Name Content Setting range Default Read Write Size
To Next Page