Omron 3G3MV-PDRT2 - Making Multi-Drop Connections; Using the Connector Provided with Unit (with Thin Cable); Example: Connector Without Set Screws

Chapter 3
3-17
Setup and Wiring
Note To avoid damaging the cable or breaking wires, do not pull on the cable or bend it too sharply
when connecting it to the terminal block. Also, never place heavy objects on top of the cable.
3-2-5 Making Multi-drop Connections
■ Using the Connector Provided with Unit (with Thin Cable)
When connecting thin cable with the multi-drop method, it is possible to insert two wires with the
same color into the same hole as shown in the following diagram.
Example: Connector without Set Screws
Insert the two wires into the same crimp terminal, as shown below.
We recommend the following Phoenix Contact crimp terminals and crimping tool.
Crimp terminal Crimping Tool
Model: AI-TWIN2
×0.5-8WH (part number 3200933) Model: UD06 (part number1204436)
6.0 mm max. 6.0 mm max.
Inserting two power
supply wires
Crimp terminal
Cables