Omron 3G3MV-PDRT2 - Objects; Identity Objects (Identification Information): Class 01 Hex

Chapter 10
10-4
Appendices
10-2 Objects
10-2-1 Identity Objects (Identification Information): Class 01 Hex
Identity objects are objects that provide DeviceNet product information. All of this information is read-
only.
■ Support Service Code
■ Object Details
Note The following table shows the contents of the Product Name and Product Code.
Service code number (hex) Service
0E Get attribute single
05 Reset (return to initial status)
Instance Attribute Name Content Setting range Default Read Write Size
01 01 Vender ID Indicates the maker's
code.
OMRON: 47 (2F hex)
--- 002F Yes No Word
02 Device Type Indicates the DeviceNet
profile classification. The
Inverter corresponds to
the AC/DC Drive.
• Master Unit: 0
• AC/DC Drive: 2
--- 0002 Yes No Word
03 Product Code Assigned to each series
by each maker.
--- See note. Yes No Word
04 Revision Indicates overall software
revisions for the
DeviceNet Communica-
tions Card.
--- 02.01 Yes No Byte ×
2
05 Status Indicates the communica-
tions status of the
DeviceNet Communica-
tions Card.
--- 0000 Yes No Word
06 Serial Number Indicates the product
serial number of the
DeviceNet Communica-
tions Card. (60000000 hex
onwards)
--- Depends
on prod-
uct.
Yes No Long
07 Product Name Indicates product model
number.
--- See note. Yes No String
08 State Not supported. --- --- --- --- ---
Communications Unit/Card Model number Product Name Product Code
3G3MV-PDRT2 3G3MV-@ 3G3MV-PDRT2 61 (3D hex)
3G3RV-PDRT2 3G3PV-@ 3G3PV-PDRT2 63 (3F hex)
3G3RV-@ 3G3RV-PDRT2 64 (40 hex)
3G3FV-@ 3G3FV-PDRT2 62 (3E hex)