Chapter 7
7-25
Configurator Settings
■ Setting Method
1.Click the Operation Time Tab in the Edit Device Parameters Window.
The numerals 00 to 05 in the No. field correspond to the combinations of signals for the operating
time measurement explained in 7-2-5 Operating Time Monitor Function.
2.Double-click the area to be set, or select the field to be set and then click the Edit Button. The
setting window will be displayed.
Item Setting range Details
Equipment Name (User-set name) Set any name for each device.
Note: The name set here is displayed in the Equipment Name
field.
Operation Time 0 to 65,535 ms Set the monitor value.
Note: The name set here is displayed in the Operation Time field.
Hold Status Button Hold or do not hold Selected: When an operation time monitoring error is detected,
this status is held.
Not selected: The status is refreshed every time.
Operation Time Tab Page
in the Edit Device
Parameters Window
Double-click the selected field, or click the Edit Button.
To Next Page
Loading...
