Omron 3G3MV-PDRT2 - Page 200

Chapter 7
7-50
Configurator Settings
7-3-3 IN Tab Page
Use the IN Tab Page to make settings for input terminals.
Note The following tables show the meanings of the numerals set in the No. field.
Item Reference
No. Refer to the following tables. ---
I/O Comment Set a user-defined name for each terminal.
Note: When the setting is made in the setting window, the setting will be dis-
played in the I/O Comment field.
7-2-11 Connected Device Com-
ment
Detection Mode Set the detection mode to either Cumulative ON Time or Contact Operations
Counter.
Note: When the setting is made in the setting window, the setting will be dis-
played in the Detection Mode field.
7-2-6 Cumulative ON Time Monitor
7-2-7 Contact Operations Monitor
Value Set the monitor value (time or count).
Note: When the setting is made in the setting window, the setting will be dis-
played in the Value field.
No. Details
3G3MV 3G3RV/3G3PV 3G3FV
00 Multi-function input 1 Forward/stop Forward/stop
01 Multi-function input 2 Reverse/stop Reverse/stop
02 Multi-function input 3 Multi-function input selection 1 Multi-function contact input 1
03 Multi-function input 4 Multi-function input selection 2 Multi-function contact input 2
04 Multi-function input 5 Multi-function input selection 3 Multi-function contact input 3
05 Multi-function input 6 Multi-function input selection 4 Multi-function contact input 4
06 Multi-function input 7 Multi-function input selection 5 Multi-function contact input 5
07
Multi-function contact input 6
Double-click the selected field or click the Edit Button.