Omron 3G3MV-PDRT2 - Page 206

Chapter 7
7-56
Configurator Settings
Network Power Voltage Displays the present value for the network
power voltage.
7-2-9 Network Power Sup-
ply Voltage Monitor
Network Power Voltage (Peak) Displays the maximum value for the network
power voltage.
Note: This setting can be cleared to zero by
clicking the Clear Button at the right of the item.
Network Power Voltage (Bot-
tom)
Displays the minimum value for the network
power voltage.
Note: This setting can be cleared to zero by
clicking the Clear Button at the right of the item.
Error Clear Button Clears the error at the Inverter. ---
Unit Sta-
tus Report
Area
Unit Maintenance Notifies that the Inverter’s operation time has
exceeded the monitor value.
7-2-8 Conduction Time
Monitor
Fan Maintenance Notifies that the fan’s operation time has
exceeded the monitor value.
Electrolytic Capac-
itor Maintenance
Notifies that the electrolytic capacitor’s opera-
tion time has exceeded the monitor value.
Network Power
Voltage Drop
Notifies that the network power voltage has
dropped below the monitor value.
7-2-9 Network Power Sup-
ply Voltage Monitor
Operation Time
Over
Notifies that the operation time has exceeded
the monitor value.
7-2-5 Operating Time Mon-
itor Function
Connected Com-
ponent Mainte-
nance
Notifies that the total ON time or contact opera-
tions count for the I/O terminals has exceeded
the monitor value.
7-2-6 Cumulative ON Time
Monitor
7-2-7 Contact Operations
Monitor
Warning Notifies that a warning or error has occurred in
the Inverter (the details are also displayed.)
---
During Forward
Run and During
Reverse Run
Notify that the Inverter is operating in forward/
reverse run.
---
Frequency Agree Notifies that the Inverter is agreement frequen-
cies.
---
Item Details Reference