Chapter 10
10-13
Appendices
■ Object Details
10-2-8 Motor Data Objects: Class 28 Hex
Motor data objects are data and functions related to motors connected to Inverters. The motors that
can be connected to Inverters are squirrel-cage inductive motors, so the “Motor Type” is always “7."
The motor's rated current and rated voltage can be set and read.
■ Support Service Code
Instance Attribute Name Content Setting range Default Read Write Size
00 01 Object Software
Revision
Indicates the software revi-
sion of Class 08.
The revision value increases
when changes have been
made.
--- 0001 Yes No Word
02 Max Instance Indicates the number of out-
put terminals. (Depends on
the Inverter being used.)
--- 0003 Yes No Word
01 to 03
(One per
terminal)
03 Value Terminal status
00: OFF, 01: ON
--- 00 Yes No Byte
05 Fault Action Hold/clear output after fault
00: Hold, 01: Clear
00, 01 00 Yes Yes Byte
65 Lifetime mode
selection
Maintenance count method
00: Conduction time,
01: Number of ON operations
00, 01 00 Yes Yes Byte
66 Lifetime present
value
Present value of the mainte-
nance count
--- 0000
0000
Ye s Ye s
Reset
Long
67 Lifetime monitor
flag
Maintenance count compari-
son result
(ON when PV ≥ threshold)
00: OFF, 01:ON
--- 00 Yes No Byte
68 Lifetime thresh-
old setting
Lifetime monitor value
Set the cumulative time that
the output is ON (s) or the
number of contact opera-
tions.
0000 0000 to
FFFF FFFF
0000
0000
Yes Yes Long
Service code number (hex) Service
0E Get attribute single
10 Set attribute single
To Next Page
Loading...
