Chapter 10
10-45
Appendices
00 2C 002C Inverter status
Bit 0 Operation 1: Operating
Bit 1 Zero speed 1: Zero speed
Bit 2 Frequency agreement 1: Agreement
Bit 3 User-defined speed agreement 1: Agreement
Bit 4 Frequency detection 1 1: Output frequency
≤ L4-01
Bit 5 Frequency detection 2 1: Output frequency
≥ L4-01
Bit 6 Inverter startup completed 1: Startup completed
Bit 7 Low voltage detection 1: Detected
Bit 8 Baseblock 1: Inverter output baseblock
Bit 9 Frequency reference mode 1: Not communications 0:
Communications
Bit 10 Run command mode 1: Not communications 0: Com-
munications
Bit 11 Overtorque detection 1: Detected
Bit 12 Frequency reference lost 1: Lost
Bit 13 Retrying error 1: Retrying
Bit 14 Fault. (including RS-422A/485 communications time-
out) 1: fault occurred
Bit 15 Communications time-out 1: Timed out
00 2D 002D Multi-function output status
Bit 0 Multi-function contact output (terminals M1-M2) 1:
ON 0: OFF
Bit 1 Multi-function PHC output 1 (terminals P1-PC): 1: ON
0: OFF
Bit 2 Multi-function PHC output 2 (terminals P2-PC): 1: ON
0: OFF
Bit 3 to 15 Not used.
--- --- 002E to 0030 Not used.
00 31 0031 Main circuit DC voltage Monitors U1-07 (1-V units)
--- --- 0032 to 0037 Not used.
00 38 0038 PID feedback
quantity
1% = 10; 100% = Input corresponding to max. output
frequency; without sign
00 39 0039 PID input
quantity
1% = 10; 100% = Max. output frequency; without sign
00 3A 003A PID output
quantity
1% = 10; 100% = Max. output frequency; without sign
00 3B 003B CPU software number
00 3C 003C Flash software number
Class 64 Register
number (hex)
Content
Instance Attribute
To Next Page
Loading...
