Omron fh-1 series - Page 330

8 Setting Windows
8 - 36
Vision System FH/FHV/FZ5 Series User’s Manual (Z365)
Additional Information
The Error Pane displays error messages for the following errors.
• System errors
• Fan or voltage errors
• Camera connection errors
• Changes made to the connected Camera
• Camera overcurrent detected
• Image logging disk write errors
• Output control timeout errors (parallel I/O, PLC Link, or EtherNet/IP)
• PLC Link communications errors
• Parallel I/O overcurrent detected
• Settings data load errors
• Settings data transfer errors
• Output timeouts (EtherCAT)
• Output buffer errors (EtherCAT)
1 In the state where you have exited layout modifications, click the upper left corner of the Error
Pane.
2 The following dialog box is displayed. Click the [Clear] button.
3 Click the [Close] button on the settings dialog box to close the dialog.
Clearing the Error Display
Click the upper left corner.