10 - 59
10 Advanced Usage
Vision System FH/FHV/FZ5 Series User’s Manual (Z365)
10-9 Positioning workpieces for stage and
robot applications [Alignment Function]
10
10-9-3 Troubleshooting
Refer to Key Points for Adjustment under PLC Master Calibration in the Vision System FH/FHV/FZ5
Series Processing Item Function Reference Manual (Cat. No. Z341).
Refer to Key Points for Adjustment under Vision Master Calibration in the Vision System FH/FHV/FZ5
Series Processing Item Function Reference Manual (Cat. No. Z341).
10-9-3 Troubleshooting
PLC Master Calibration
Vision Master Calibration
Calibration Support Tool
Symptom Type Parameters to adjust Correction
The unit number is set to
[None] and cannot be
selected.
---
Check whether there are any processing
items that retain calibration data that are
registered in the current scene.
The setting data is initial-
ized every time the Tool-
box is opened.
• Tool Settings Save Button
• Tool Settings Load Button
This is the specified behavior. If you need to
save the settings data, use the [Save] but-
ton in the Toolbox. The saved settings can
be loaded with the [Load] button.
How do you rotate the
graphic display for bet-
ter visibility?
• Standard axis
• Axis direction
• Direction of rotation
You can rotate the graphic display along the
standard axis, axis direction, and rotation
direction on the [Display setting] tab page.
To Next Page
Loading...
