9 - 33
9 Saving/Loading Data
Vision System FH/FHV/FZ5 Series User’s Manual (Z365)
9-8 Copying Settings for Each
Line in Multi-line Random-trig-
9
9-8-1 Before use of Line Maintenance
There are two types of settings data that can be configured with the Line Maintenance tool, Line-spe-
cific settings data and sensor controller settings common to all lines. Line-specific settings data can be
copied and cleared. Sensor Controller settings common to all lines can be cleared.
9-8-1 Before use of Line Maintenance
The setting data
of the line.
Sensor controller
settings common
to all lines
To Next Page
Loading...
