Omron fh-1 series - 4-4 Setting Operation Mode [Startup Settings]

4 Setting the Controller
4 - 12
Vision System FH/FHV/FZ5 Series User’s Manual (Z365)
4-4 Setting Operation Mode [Startup Set-
tings]
Select the operation mode according to the application conditions, such as the operation mode
that is best suited to reduce the takt time and downtime.
Refer to 4-4-1 Setting the Operation Mode on page 4-13 for details on the operation modes.
1 Click the [Apply] button.
Item Set value [Factory default] Description
Operation
mode
• Double Speed Multi-input
• [Standard]
• Multi line random trigger
• Non-stop adjustment
Set the operation mode.
Refer to
4-4-1 Setting the Operation
Mode
on page 4-13.
Parallel execu-
tion
ON/[OFF] Set whether to uses parallel process-
ing.
Refer to Parallel Processing Settings
(Automatic Parallelization) on page 4-
29.