Omron fh-1 series User Manual

10 - 3
10 Advanced Usage
Vision System FH/FHV/FZ5 Series User’s Manual (Z365)
10-1 Remotely Operating the Controller
[Remote Operation]
10
10-1 Remotely Operating the Controller
[Remote Operation]
With a PC on your network, you can remotely operate processing items editing or actual measurements
to be performed on the Sensor Controller. This feature is only available with an Ethernet connection.
Additional Information
Remote Operation Tool and simulation software can be downloaded for free if you register as a
member. For details, please check the member registration sheet that is included in the sensor
controller.
Precautions for Correct Use
A Sensor Controller window cannot be operated or displayed simultaneously on multiple PCs
on a network.
Precautions for Correct Use
The physical storage location of the setting data and data saving destination is on the Sensor
Controller.
For instance, the following usage is possible.
(1) Using one specific PC handles GUI operations such as editing processing items and
changing settings for inspection and measurement on multiple lines.

Omron fh-1 series Specifications

General

Brand	Omron
Model	fh-1 series
Category	Machine Vision Systems
Language	English