Omron fh-1 series User Manual

9 Saving/Loading Data
9 - 44
Vision System FH/FHV/FZ5 Series User’s Manual (Z365)
There are some functional limitations for the Line Maintenance tool when operating with [Apply immedi-
ately] checked. This is an explanation of the steps for operating the Line Maintenance tool with func-
tional limitations.
This describes the steps for operating with [Apply immediately] checked.
Additional Information
If there is insufficient memory in the sensor controller, the tool will be launched with [Apply
immediately] checked.
Refer to Launching the Line Maintenance tool on page 9-36.
1 With [Apply immediately] checked.
2 The following Confirm dialogue screen will display.
After verifying the setting data in the After revision area is correct, click the [OK] button.
Prior to checking the check box for [Apply immediately], the setting data is applied to the sensor
controller immediately by the Copy/Clear operation.
3 The [Undo], [Reset] and [Apply] buttons will be grayed out.
9-8-3 Operating with Functional Limitations
Steps for Operating with Functional Limitations

Omron fh-1 series Specifications

General

Brand	Omron
Model	fh-1 series
Category	Machine Vision Systems
Language	English