9 - 45
9 Saving/Loading Data
Vision System FH/FHV/FZ5 Series User’s Manual (Z365)
9-8 Copying Settings for Each
Line in Multi-line Random-trig-
9
9-8-3 Operating with Functional Limitations
This explains the steps for copying setting data when [Apply immediately] is checked.
1 Click on the setting data in the Before revision area you want to copy.
In the Description area, a description of the selected settings will be displayed.
2 Click [Copy]
3 In the After revision area check the settings that will be copied.
The [Paste] button will be grayed out in the following cases.
• If the same line as that selected for setting copy is checked.
• If the setting data type differs from that which is checked for Copy operation.
Using Copy with Functional Limitations
To Next Page
Loading...
