9 Saving/Loading Data
9 - 46
Vision System FH/FHV/FZ5 Series User’s Manual (Z365)
4 Click the [Paste] button.
5 The Confirm dialogue screen is displayed.
After verifying the setting data in the After revision area is correct, click the [Yes] button.
The selected setting data will be copied. Once the [Yes] button is clicked, the applied changes
cannot be undone.
This explains the steps for clearing setting data when [Apply immediately] is checked.
1 Select the setting data to clear in the After revision area. Multiple setting data can be selected.
2 The following Confirm dialogue screen is displayed.
After verifying the selected setting data in the After revision area is correct, click the [OK] button.
The selected setting data will be cleared. Once the [OK] button is clicked, the applied changes
cannot be undone.
Using Clear with Functional Limitations
To Next Page
Loading...
