Omron fh-1 series - Page 50

1 Overview
1 - 8
Vision System FH/FHV/FZ5 Series User’s Manual (Z365)
↓
Scene Editing In the Main Window (layout 0), edit the mea-
surement flow.
• Register processing items.
• Set the properties for each processing item.
Refer to Section 5 Creating Measurement
Scenes on page 5-1
.
↓
Click the [Data save] button. Refer to 9-2 Saving Settings Data to the
Flash Memory on page 9-7
.
↓
Testing Execute test measurements.
(In the Main Window (layout 0), click the [Mea-
sure] button.)
Refer to 6-1 Executing Test Measurements
on page 6-3
.
↓
Adjust the parameters for each processing item. Vision System FH/FHV/FZ5 Series Process-
ing Item Function
Reference Manual (Cat. No. Z341)
↓
Click the [Data save] button. Refer to 9-2 Saving Settings Data to the
Flash Memory on page 9-7
.
↓
Measuring
(Operation)
In the Main Window (layout 0), click the [Switch
layout] button, and then select [Main Window
(Layout 1)].
Refer to Section 6 Performing Measurement
and Adjustment on page 6-1
.
↓
In the Main Window (layout 1), check the com-
munications with the PLC.
Vision System FH/FHV/FZ5 Series User's
Manual for Communications
Settings (Cat. No. Z342)
↓
In the Main Window (layout 1), execute com-
mands from the PLC, such as measurement
trigger commands.
Vision System FH/FHV/FZ5 Series User's
Manual for Communications
Settings (Cat. No. Z342)
↓
Management
and Analysis
Save and analyze measurement data and
images.
Refer to 6-5 Analyzing Inspection and Mea-
surement Results [NG Analyzer] on page 6-
29.
Refer to Section 9 Saving/Loading Data on
page 9-1
.
Procedure Description Reference