Omron SYSMAC CJ - REFERENCE MANUAL 08-2008 User Manual

1004
Serial Communications Instructions Section 3-24
Controlling Signals
Related PLC Setup Settings
CX-Programmer Settings for the CPU Unit’s Built-in RS-232C Port
RXD
D00100
D00200
00000
D
C
&10N
0 0 03
15 8 71112 340
C: D00400
0
15
1314 12
D: D00100
001
Turns OFF ER signal.
Turns ON RS signal.
Alwa
y
s #0.
Serial Port Specifier
#0: CPU Unit's built-in RS-232C port
RS and ER Signal Control
#3:
RS and ER signal control
Byte Order
#0:
Most significant bytes firs
t
When CIO 00001 turns ON, the
status of bit 15 of D00300 is
output as the RS signal and the
status of bit 14 is output as the
ER signal.

Omron SYSMAC CJ - REFERENCE MANUAL 08-2008 Specifications

General

Brand	Omron
Model	SYSMAC CJ - REFERENCE MANUAL 08-2008
Category	Controller
Language	English