Omron SYSMAC CJ - REFERENCE MANUAL 08-2008 - Page 1357

1317
CJ-series Instruction Execution Times and Number of Steps Section 4-2
Note 1. When a double-length operand is used, add 1 to the value shown in the
length column in the following table.
2. CJ1-H-R CPU Units only.
ACCUMULA-
TIVE TIMER
TTIM 087 3 16.1 16.1 17.0 21.4 27.4 30.9 ---
10.9 10.9 11.4 14.8 19.0 21.2 When resetting
8.5 8.5 8.7 10.7 15.0 16.6 When interlocking
TTIMX 555 16.1 16.1 17.0 --- 27.4 --- ---
10.9 10.9 11.4 --- 19.0 --- When resetting
8.5 8.5 8.7 --- 15.0 --- When interlocking
LONG TIMER TIML 542 4 7.6 7.6 10.0 12.8 16.3 17.2 ---
6.2 6.2 6.5 7.8 13.8 15.3 When interlocking
TIMLX 553 7.6 7.6 10.0 --- 16.3 --- ---
6.2 6.2 6.5 --- 13.8 --- When interlocking
MULTI-OUT-
PUT TIMER
MTIM 543 4 20.9 20.9 23.3 26.0 38.55 43.3 ---
5.6 5.6 5.8 7.8 12.9 13.73 When resetting
MTIMX 554 20.9 20.9 23.3 --- 38.55 --- ---
5.6 5.6 5.8 --- 12.9 --- When resetting
COUNTER CNT --- 3 0.51 0.56 0.88 0.42 1.30 1.30 ---
CNTX 546 0.51 ---
REVERSIBLE
COUNTER
CNTR 012 3 16.9 16.9 19.0 20.9 31.8 27.2 ---
CNTRX 548 ---
RESET
TIMER/
COUNTER
CNR 545 3 9.9 9.9 10.6 13.9 14.7 17.93 When resetting 1
word
4.16
ms
4.16
ms
4.16
ms
5.42
ms
6.21
ms
6.30
ms
When resetting
1,000 words
CNRX 547 3 9.9 9.9 10.6 13.9 14.7 17.93 When resetting 1
word
4.16
ms
4.16
ms
4.16
ms
5.42
ms
6.21
ms
6.30
ms
When resetting
1,000 words
Instruction Mne-
monic
Code Length
(steps)
(See
note 1.)
ON execution time (µs) Conditions
CPU6
@H-R
CPU6
@H
CPU4
@H
CPU4
@
CJ1M
exclud-
ing
CPU11
/21
CJ1M
CPU11
/21