Navigate BIOS Setup Utility Menus
2.
Use the left and right arrow keys to select the different primary menu options.
As you select each menu option, the top-level screen for that menu option appears.
3.
To navigate options presented on a top-level screen, use the up and down arrow
keys.
Only options that can be modified are highlighted when you press the up and down arrow keys.
■ If an option can be modified, as you select the option, user instructions for
modifying the option appear in the right column of the screen.
■ If an option is a link to a sub-screen, a description of the sub-menu content
appears in the right column.
4.
Modify an option by pressing the + or - keys (plus or minus keys) or by pressing
Enter and selecting the desired option from the pop-up menus.
5.
Press the Esc key to return from a sub-menu screen to the previous menu
screen.
Pressing Esc from a top-level menu is equivalent to selecting the Discard Changes and Exit
option from the Save & Exit Menu.
6.
Modify parameters as needed.
7.
Press the F10 key to save your changes and exit the BIOS Setup Utility.
Alternatively, you can select the Exit Menu, and then select the Save Changes and Reset to
save your changes and exit the BIOS Setup Utility.
Note - After modifying any BIOS settings and selecting Save Changes and Reset from the
Exit Menu, the subsequent reboot might take longer than a typical reboot where no settings
were modified. The additional delay is required to ensure that changes to the BIOS settings are
synchronized with Oracle ILOM.
Related Information
■
“BIOS Setup Utility Menus” on page 178
■
“BIOS Key Mappings” on page 179
■
“BIOS Setup Utility Menu Options” on page 203
182 Oracle Exadata Storage Server X5-2 High Capacity Service Manual • January 2018
To Next Page
Loading...
