FRU Key Identity Properties (KIP) Automated Update
Wear an antistatic wrist strap and use an antistatic mat when handling components such as
drive assemblies, boards, or cards. When servicing or removing server components, attach
an antistatic strap to your wrist and then to a metal area on the chassis. Then disconnect
the power cords from the server. Following this practice equalizes the electrical potentials
between you and the server.
Note - An antistatic wrist strap is not included in the Accessory Kit for the server. However,
antistatic wrist straps are included with options and components.
■
Use an antistatic mat.
Place ESD-sensitive components such as the motherboard, memory DIMMS, and other
printed circuit board (PCB) cards on an antistatic mat. The following items can be used as
an antistatic mat:
■
An antistatic bag used to wrap an Oracle replacement part
■
An Oracle ESD mat (orderable item)
■
A disposable ESD mat (shipped with some replacement parts or optional system
components)
Related Information
■
“Safety Precautions” on page 47
■
“Safety Symbols” on page 48
■
“Preparing the Server for Component Replacement” on page 50
■
“Returning the Server to Operation” on page 161
FRU Key Identity Properties (KIP) Automated Update
Oracle ILOM includes a key identity properties (KIP) auto-update feature that ensures product
information that is used for service entitlement and warranty coverage is accurately maintained
by the server at all times, including during hardware replacement activities.
The KIP includes the server product name, product part number (PPN), and product serial
number (PSN). The KIP are stored in the FRUID (field-replaceable unit identifiers) container of
the three server FRUs that are designated quorum members.
The quorum members include:
■
Disk backplane (DBP), designated as a primary quorum member.
Preparing for Service 49
To Next Page
Loading...
Need help?
General