Install a Storage Drive
5.
Grasp the latch and pull the drive out of the drive slot.
6.
Consider your next steps:
■
If you are replacing the drive, continue to “Install a Storage Drive” on page 65.
Caution - Whenever you remove a storage drive, you should replace it with another storage
drive; otherwise, the server might overheat due to improper airflow.
Related Information
■
“Storage and Boot Drive Indicators” on page 29
■
“Storage Drives Hot-Plug Conditions” on page 62
■
“Install a Storage Drive” on page 65
Install a Storage Drive
1.
Remove the replacement drive from its packaging, and place the drive on an
antistatic mat.
2.
If necessary, remove the drive filler panel.
Servicing Components That Do Not Require Server Power-Off 65
To Next Page
Loading...
Need help?
General