Configure TPM Support
Configure TPM Support
If you intend to use the Trusted Platform Module (TPM) feature set, you must configure the
server to support this feature.
Note - TPM enables you to administer the TPM security hardware in your server. For additional
information about implementing this feature, refer to the Windows Trusted Platform Module
Management documentation provided by your operating system or third-party software vendor.
1.
Access the BIOS Setup Utility menus.
See “Access BIOS Setup Utility Menus” on page 179.
2.
In the BIOS Setup Utility menus, navigate to the Advanced Menu.
The Advanced Menu screen appears.
3.
In the Advanced Menu screen, select Trusted Computing.
The TPM Configuration screen appears.
Setting Up BIOS Configuration Parameters 191
To Next Page
Loading...
