Select Legacy BIOS or UEFI BIOS Boot Mode
The UEFI/BIOS dialog box appears.
Note - You cannot configure the boot device priority after switching the boot mode. A system
reboot is required to properly populate the Boot Options Priority list with devices that support
the chosen boot mode.
4.
Use the up and down arrow keys to select the appropriate Legacy or UEFI mode,
and then press Enter.
5.
Press F10 to save the changes and exit the BIOS Setup Utility.
Related Information
■
“BIOS Setup Utility Menus” on page 178
■
“BIOS Key Mappings” on page 179
Setting Up BIOS Configuration Parameters 189
To Next Page
Loading...
