Exit BIOS Setup Utility
A confirmation dialog box appears.
4.
In the confirmation dialog box, select Yes to proceed and exit the BIOS Setup
Utility, or select No to stop the exit process.
Note - After modifying any BIOS settings and selecting Save Changes and Exit from the
Exit Menu, the subsequent reboot might take longer than a typical reboot where no settings
were modified. The additional delay is required to ensure that changes to the BIOS settings are
synchronized with Oracle ILOM.
Related Information
■
“Access BIOS Setup Utility Menus” on page 179
■
“BIOS Setup Utility Menus” on page 178
Setting Up BIOS Configuration Parameters 201
To Next Page
Loading...
