BIOS Advanced Menu Selections
Setup Options Options Defaults Description
Active Mgmt Port NET MGT/NET0/NET1/
NET2/NET3
NET MGT Use to change the
currently active network
management port.
Commit NA NA Commit the current BMC
network LAN information.
IPv4 Configuration NA NA Current configuration
of the IPv4 settings is
displayed.
Channel Number (R/O) 1 Current channel number is
displayed.
Current IPv4 IP
Assignment in BMC (R/O)
Static/Dynamic Static Set the IPV4 IP
assignment to Static or
Dynamic. This setting
determines whether
the service processor is
assigned a static IPv4
address or assigned a
dynamic IPv4 address
using Dynamic Host
Control Protocol (DHCP).
Current IPv4 address in
BMC (R/O)
NA NA Displays the current IPv4
address in the BMC.
Current IPv4 MAC
Address in BMC (R/O)
NA NA If IPv4 Assignment is
set to Static, set the IPv4
address for the service
processor.
Example: 172.31.255.255
Current IPv4 Subnet Mask
in BMC (R/O)
NA NA If the IPv4 Assignment is
set to Static, set the IPv4
subnet mask.
Example: 255.255.255.0
Current IPv4 Default
Gateway in BMC
NA NA If the IPv4 Assignment is
set to Static, set the IPv4
default gateway
Example: 172.31.255.255
Refresh Refresh the current BMC
LAN information.
IPv4 IP Assignment Static/Dynamic Static Current IPv4 assignment.
IPv4 Address NA NA If set, current IPv4 address
is displayed.
IPv4 Subnet Mask NA NA If set, current IPv4 Subnet
Mask is displayed.
IPv4 Default Gateway NA NA If set, current IPv4 Default
Gateway is displayed.
BIOS Setup Utility Menu Options 215
To Next Page
Loading...
