BIOS Advanced Menu Selections
Setup Options Options Defaults Description
Dynamic IPv6 Address 1-n
(R/O)
Current dynamic IPv6
addresses are displayed.
Example: fec0:a:8:b7:
214:4fff:feca:5f7e/64
Refresh Select Refresh to update to
the current settings.
IPv6 State Disabled/Enabled Disabled Set the IPv6 state to
enabled or disabled.
Auto IPv6 Configuration Disabled/
Stateless/
Dhcpv6_stateless/
Dhcpv6_stateful
Disabled Autoconfiguration options
are:
■ Disabled: When
autoconfiguration
is disabled, only the
Link Local address
is set. None of the
autoconfiguration
options to configure an
IPv6 address are run.
■ Stateless: When
enabled, the
IPv6 Stateless
autoconfiguration
is run to learn the
IPv6 addresses for the
device.
■ Dhcpv6_stateless:
When enabled, the
Dhcpv6_stateless
autoconfiguration
is run to learn the
DNS and domain
information for the
device.
■ Dhcpv6_stateful:
When enabled, the
Dhcpv6_stateful
autoconfiguration is
run to learn the IP
addresses and DNS
information for the
device.
Static IPv6 Address (R/O) Set the static IPv6 address.
Example: 2001:0db0:
000.82a1:0000:0000:
1234:abcd
Commit Commit the current BMC
LAN information.
BIOS Setup Utility Menu Options 217
To Next Page
Loading...
