BIOS Advanced Menu Selections
Setup Options Options Defaults Description
Example: Update
0ABBCCDDEEFF to
0ABBCCF07901 by
inputting F07901
Enable DHCP Disabled/Enabled Disabled Enable or disable DHCP
Initiator IP Address NA 0.0.0.0 Use to set initiator IP
address in dotted-decimal
notation.
Initiator Subnet Mask NA 0.0.0.0 Use to set initiator subnet
mask IP address in dotted-
decimal notation.
Gateway NA 0.0.0.0 Use to set initiator gateway
IP address in dotted-
decimal notation.
Target Name NA NA The worldwide unique
name of the target. Only
IQN format is accepted.
Target IP address 0.0.0.0 None Use to set target IP address
in dotted-decimal notation.
Target Port 3260 Use to change target port
number.
Boot LUN 0 Use to set the hexadecimal
representation of the
boot logical unit number
(LUN).
Example: 4752-3A4F-
6b7e-2F99
Authentication Type CHAP/None CHAP Define the Challenge-
Handshake Authentication
Protocol (CHAP).
Available settings are
CHAP, Kerberos, and
None.
CHAP Type One Way/Mutual One Way Use to set CHAP type to
either One Way or Mutual.
CHAP Name NA None Use to set CHAP name.
CHAP Secret NA None Use to set the CHAP secret
password. The secret
length range is 12 to 16
bytes.
Delete Attempts NA NA Use to delete one or more
attempts.
Change Attempt Order NA NA Use to change the order of
attempts. Use arrow keys
to select the attempt, then
BIOS Setup Utility Menu Options 219
To Next Page
Loading...
