Oracle EXADATA X5-2 - Page 95

Install the Internal USB Flash Drive
2.
Insert the flash drive into the USB slot.
3.
Return the server to operation.
a.
Install the server top cover.
See “Install the Server Top Cover” on page 161.
b.
Return the server to the normal rack position.
See “Return the Server to the Normal Rack Position” on page 165.
c.
Reconnect the power cords to the server power supplies and power on the
server.
See “Reconnect Power and Data Cables” on page 167 and “Power On the
Server” on page 167. Verify that the AC OK LED is lit.
Related Information
■
“Remove the Internal USB Flash Drive” on page 93
Servicing Components That Require Server Power-Off 95