Oracle SL150 - Page 8

Configure Automatic Cleaning in Oracle Secure Backup During Drive Setup 7-6
Set Up NetBackup for Reactive Cleaning 7-6
Set Up Symantec Backup Exec Drive Cleaning 7-7
Set Up Reactive Cleaning for HP StorageWorks Enterprise Backup Solution
with HP Data Protector 7-7
Set Up As-Needed Cleaning in IBM Tivoli Storage Manager (TSM) 7-7
Set Up Tape-Alert Cleaning in EMC Networker 7-7
Set Up CommVault Drive Cleaning 7-8
Manually Clean a Drive (Not Recommended) 7-8
Restart a Drive 7-9
Enable or Disable Drive Ports 7-9
Update the Drive Firmware 7-9
8
Monitor the Library
View the Library Screen 8-1
View the Library State 8-2
Library LED Status Indicators 8-2
Determine the Possible Cause of a Degraded or Failed Library State 8-3
View User and Host Activity 8-3
Configure Simple Network Management Protocol (SNMP) 8-4
SNMP Versions 8-4
SNMP Traps 8-5
Enable or Disable SNMP 8-5
Configure an SNMP User 8-5
Configure an SNMP Trap Recipient 8-6
Send a Test Trap 8-6
Download the Management Information Base (MIB) 8-6
Enable or Disable the Service Delivery Platform (SDP2) 8-7
Configure Email Notifications 8-7
Enable or Disable Email Notifications 8-7
Configure Email Recipients 8-8
Send a Test Email Alert 8-8
9
Service the Library
Place the Library Online or Offline 9-1
Power On the Library 9-2
Library Startup Sequence 9-2
Power Off the Library 9-2
Controlled Power-Down from the Interface 9-3
Forced Power-Down 9-3
viii