Panasonic MINAS-A5NL Series - Page 4

No. SX-DSV02310
R2.0 Motor Business Division, Appliances Company, Panasonic Corporation
Revisions
Date Page Rev. Description Signed
(Apr.1,2013) (Continuation) -
82,101,116,
137-141,145,161
4)Profile homing command extension
Type_Code = 34h : Profile homing 4
Type_Code = 35h : Profile homing 5
74,75,76,78,79
5)Parameter command extension
Type_Code = 020h : Parameter initial value read-out
Type_Code = 030h : The number read-out of the parameters in a
classification
Type_Code = 040h : Parameter attribute read-out
- 6) PANATERM connection axis check representational function
37-39
7)Pr7.24” RTEX function extended setup 3” extension
bit2:Setting condition to output the positioning complete signal during
servo-off
bit3:Setting condition for In_Position(positioning complete signal) of
RTEX communication
bit4:Setting condition for Servo_Active (servo-on state signal) of RTEX
Communication
-
8)Pr6.10” Function extended setup” extension.
bit9:For manufacturer use
-
Added the description of setting Pr5.13” Over-speed level setup” and
Pr6.15” 2nd over-speed level setup” under alarm sequence
5,7 Added the description of pulse regeneration function.
94,95
Added the description of Safety input signal, External device monitor
(EDM) output.
Note: The page number (Page) is the current page number at the time of revision.