Pentair INTELLITOUCH - Page 53

IntelliTouch
®
Control System User’s Guide
43
Setting up Set Colors and Color Swim with SAm, SAL,
or FIBERworks (Continued)
MENU SETUP CIRCUIT FUNCTIONSADVANCED
Getting There
1. Press the button next to an available AUX(AUX1-AUX8) button to assign a light function a
circuit.
2. Press the right or left side PREV/NEXT button to scroll through the preset special circuit
functions and choose a light selection (LIGHT, SAM LIGHT, SAL LIGHT, PHOTON GEN,
COLOR WHEEL). See page 40 for the complete list of preset circuit functions. Note: To use the
Color Swim or Color Set feature you need to select SAM, SAL, Photon Generator or Color Wheel.
3. Press the SAVEbutton on the bottom of the screen. To assign other circuits, press the BACK button
and repeat step 2, and 3)
4. AssignanametotheAUXcircuit: Press the BACK button two time until the Advanced screen is
displayed..
5. Press the button next to CIRCUIT NAMES.
6. Press the button next to ASSIGN CIRCUIT NAMES to assign a name to the AUX (AUX 1-AUX)
light circuit. From the Circuit Names screen you can assign circuit names for the main screen and
create custom names.
7. Press the button next to DISPLAY 1. Display 1 is the main indoor control panel. If there are
additional IntelliTouch Expansion Centers installed, Display 2, Display 3, and Display 4 will be
displayed. Select which indoor control panel to congure. From this screen you can also congure
Feature circuits.
8. Press the button next to the assigned AUX. A small arrow will appear next to the selected auxiliary
circuit.
9. Use the DOWN/UP buttons select the name that you want to use for the light. For this example select
SPA SAL for a spa light. Press the
SAVEbutton on the bottom of the screen to save the name. Press
the EXIT button when nished. Use this button to switch the light on and off.
10. Proceed to Step 11 to congure a SPA SAL light for the Color Swim of Color Set lighting feature.
MENU/SETUP/ADV/FUNC/AUX 1
EXIT
BACK
NO
NEXT
AUX 1
PREV
ON WITH FREEZE
SAVE
SAL LIGHT
AUX 2
AUX 3
AUX 1
AUX 4
AUX 7
AUX 6
AUX 5
AUX 8
MENU/SETUP/ADV/FUNCTION/SELECT
BACK EXIT
1