Glossary of Terms 170
P/N CLS151164 Rev. B LabChip GX Touch/GXII Touch User Manual PerkinElmer, Inc.
End Point
The peak find algorithm looks for a leveling off when the value of
the slope is less than the value set for the slope threshold. This is
marked as the end point of the peak.
End Time
This setting determines the time after the start of a run before which
the last peak or fragment will be located (any peaks appearing after
this time are ignored). Analysis settings can only be changed when
reviewing LabChip GX Touch data in the LabChip GX Reviewer
software.
Excluded Peak File
Excluded Peak files are used to import Excluded Peaks into a data
file as the data file is created. The Excluded Peak file contains the
size or time of the excluded peaks, the color used to identify each
excluded peak, and a name for each excluded peak. Excluded Peak
Files are created in the LabChip GX Reviewer software. See the
LabChip GX Reviewer User Manual for details on creating the
Excluded Peak file.
Expected Peak File
Expected Peak files are used to import Expected Peaks into a data
file as the data file is created. The Expected Peak file contains the
size or time of the expected peaks, the color used to identify each
expected peak, and a name for each expected peak. Expected
Peak Files are created in the LabChip GX Reviewer software. See
the LabChip GX Reviewer User Manual for details on creating the
Expected Peak file.
GXD Files
The file extension for data files created in the LabChip GX Touch
software. See Data Files.
To Next Page
Loading...
Need help?
General
