Software Reference 96
P/N CLS151164 Rev. B LabChip GX Touch/GXII Touch User Manual PerkinElmer, Inc.
Diagnostics Tab (Continued)
Run Tests button - Runs the selected tests (marked with a check
mark). After all tests are complete, the Test Report Generation
section on the right side of the tab displays the date and time when
the test report was created, the name of the test report (*.log), and
the location where the test report was saved. Test report files can
be opened with a text editor such as Windows Notepad.
Abort button - Stops the tests in progress. Only enabled when
tests are running.
Limits Report button - Generates a report of test limits. After the
report is generated, the Limits Report Generation section at the
bottom of the right side of the tab displays the date and time when
the limit report was generated, the name of the limits report, and the
location where the limits report was saved.
Print button - Opens the Print Diagnostic Logs window to print
the selected report. The view of the report can be changed with the
Page Mode button, Two Page Mode button, Scroll Mode button,
and Zoom controls at the bottom of the right side of the tab.
Print Summary button - Opens the Print Diagnostic Summary
window to print a summary of the selected test results.
The bottom of the window displays the status, an overall progress
bar for the entire set of selected tests and a separate test progress
bar for the test that is currently running.
To Next Page
Loading...
Need help?
General
