Software Reference 99
P/N CLS151164 Rev. B LabChip GX Touch/GXII Touch User Manual PerkinElmer, Inc.
Plate Editor Tab (Continued)
The Plate Editor tab contains the following options and buttons:
Plate Information table - Displays the plate information for each plate
defined for use in the system. (See Add Plate Window for a description
of each column.)
Delete Selected Plate button - Deletes the selected plate from the
system. (Only available when a plate is selected on the Custom
Plates tab.)
Add Plate button - Opens the Add Plate Window to enter the
information for a new plate. (Only available when the Custom Plates
tab is selected.)
Modify Selected Plate - Opens the Modify Plate Window to edit the
information for the selected plate. The Modify Plate Window
contains the same options as the Add Plate Window. (Only available
when the Custom Plates tab is selected.)
Verify Plate button - Opens the Verify Plate window to perform a
puncture test using the selected plate information. Follow the
instructions in the Verify Plate window to test the settings for the
selected plate.
To Next Page
Loading...
Need help?
General
