Connect+® Series Operator Guide
b. Address Service Requested - Select this if you want your mail pieces to be for-
warded to the updated address. Written notification is provided back to the sender for
$0.50 each. After 12 months, the pieces are returned without a fee.
6. Depending on the option selected in step 5, the inscription (if applicable) appears on the
envelope screen.
7. Advance the date by selecting the date on the Edit Envelope screen.
8. Select the appropriate date option, for example, Today + 1 day. Select OK. The Run Mail
screen displays with the advanced date shown.
9. If you need to add a Drop Ship Authorization number, refer to Adding the Drop Ship
Authorization Meter Text.
10. Go to Saving the Presort Xtra Job.
Adding the Drop Ship Authorization Meter Text
This procedure describes how to add the Drop Ship Authorization number. This number may
be required when Setting Up a PresortXtra Job. You get this number from the USPS. This
will print on two lines as:
“D/S AUTH #### “
“MAILED AT CITY STATE”
If you need to add a Drop Ship Authorization number, you should save it as part of your Pre-
sortXtra job.
1. Ensure that the appropriate PresortXtra job is open and selected on the Run Mail screen.
2. Select anywhere within the envelope on the Run Mail screen. You can also select the
Edit envelope link.
3. Select the Text Message option from the list box on the left of the Edit envelope screen.
4. If you have already created a Drop Ship Authorization number, select it from the mes-
sages displayed on the Edit envelope screen. The message is then positioned in a
default location on the envelope.
a.
To add a new message, select the New text message button.
b. For line 1, enter the D/S number, for example: D/S AUTH 12345
c. For line 2, enter "Mailed at" followed by the city and state; for example, Mailed at Hart-
ford CT.
98
SV62250 Rev. G
To Next Page
Loading...
