Chapter 2
The Default Job
There is always at least one job open in Run Mail - the default job.
The default job is special:
l
it is always open, and
l
it is protected so you don't overwrite it easily.
NOTE: To clear all changes made while running mail and to return to the default job to its
original state, select the Reload job link on the Default job tab.
Opening a Job
Follow the steps below to open a job.
1. You can open a job by selecting the Open a job tab on the Run Mail screen or by select-
ing the Jobs button on the Home screen. The Jobs screen appears with a list of jobs avail-
able on your system.
2.
Select the job you want to open.
NOTE: Up to five jobs can be open at one time.
3. Select OK. A tab for the job opens on the Run Mail screen.
Previewing Jobs
The Jobs screen lists all the jobs stored on your system.
1. Select the Open a job tab from within the Run Mail screen, or select the Jobs button on
the Home screen.
2. The Jobs screen appears with a list of jobs available on your system.
l
If necessary, you can sort the jobs by name, type or creator. Select the appropriate col-
umn heading to change the sort order.
l
Use the up and down arrow buttons to scroll through the list.
3.
Select the job you want to preview. You can change the view of the job using the icons in
28
SV62250 Rev. G
To Next Page
Loading...
