Connect+® Series Operator Guide
3. Select Required if you want prevent the job from being run unless a Job ID is selected.
l
Selecting this option for Job ID 1 means you must select a Job ID 1 to process mail.
l
Selecting this option for Job ID 2 means you must select a Job ID 2 to process mail.
l
Job ID 1 and Job ID 2 options must be set individually. Requiring Job ID 1 does not
automatically do the same for Job ID 2.
4. Select Autoclear after every batch if you want to automatically clear the Job ID when a
batch is selected.
l
Selecting this option for Job ID 1 means the system will clear the Job ID 1 at the end
of each batch.
l
Selecting this option for Job ID 2 means the system will clear the Job ID 2 at the end
of each batch.
l
Job ID 1 and Job ID 2 options must be set individually. Autoclearing Job ID 1 does not
automatically do the same for Job ID 2.
5. Select Done to return to the Home screen.
Selecting Job IDs while Running Mail
Job IDs are selected on the Run Mail screen. Depending on your account settings, you may
be required to enter a Job ID 1 and/or Job ID 2 before processing mail.
1. Ensure that the appropriate job is open and selected on the Run Mail screen
2. Select Job ID 1 in the Job Properties list box.
l
If you know the Job ID 1, enter the ID number and select OK.
l
If you want to see a list of recently used Job ID 1's, select View all recent Job ID 1's.
Select the appropriate Job ID 1 and then select OK. If necessary, you can use the
arrow keys to scroll through the list.
l
If you want to remove the Job ID 1 from the job, select Clear Job ID 1.
3. Select Job ID 2 in the Job Properties list box.
l
If you know the Job ID 2, enter the ID number and select OK.
l
If you want to see a list of recently used Job ID 2's, select View all recent Job ID 2's.
Select the appropriate Job ID 2 and then select OK. If necessary, you can use the
arrow keys to scroll through the list.
l
If you want to remove the Job ID 2 from the job, select Clear Job ID 2.
128
SV62250 Rev. G
To Next Page
Loading...
