Pitney Bowes Connect+ 1000 - Editing a User

Chapter 8
l
Print refill receipts
l
Print refill summary
l
Reset batch counter
l
Reset IntelliLink Factory Settings
l
Withdraw a meter
1. Select the Settings button on the Home screen.
2. The Settings screen displays. Select System from the list on the left side of the screen.
3. Select Users.
4. Select the Roles setup tab.
5. Select the Operator user role.
6. Select the functions in the Allow access to: list that you want users to be able to perform.
l
A check box with a check mark indicates that all operators will have access to the
function.
l
An empty check box indicates that all operators will not have access to the function.
7. Select Done to return to the Home screen.
Editing a User
Follow the steps below to edit a user on your system.
NOTE: Supervisor access rights are required to edit a user.
1. Select the Settings button on the Home screen.
2. The Settings screen displays. Select System from the list on the left side of the screen.
3. Select Users.
4. Select a user to edit. If necessary, use the up and down arrow buttons to navigate through
the list.
5. Select Edit.
172
SV62250 Rev. G