Connect+® Series Operator Guide
NOTE: The maximum and minimum postage refill amounts for your system are listed on
the Meter information tab.
5. When prompted, select Confirm. The system connects to the Data Center and begins to
add the postage to your meter.
6. The system will notify you when it finishes adding your postage. If you want to print a
receipt select the Print receipt button.
l
To print the receipt on an envelope, place an envelope of the feed deck and select the
Start button.
l
To print the receipt on a piece of tape, select the Tape button.
l
If you have an optional attached printer, select the Print on document button.
7. Select Done to exit the Funds application.
Checking your Balance at Pitney Bowes
Before adding postage to your system, you should check the funds available through your
postage account.
1. Select the Funds button on the Home screen.
2. The Funds screen displays. If necessary, select the Meter Funds tab.
3.
Select Get Balance to obtain your current postage account balance. The system will
notify you once the account balance has been updated.
NOTE: If you are using a LAN connection, and are constantly connected to your post-
age account, the balance updates automatically.
4. Select OK.
5. If you would like to print a funds report, select Print funds report....
l
If you want to print the refill history on an envelope, place an envelope of the feed
deck and select the Start button.
l
If you want to print the refill history on a piece of tape, select the Tape button.
6. Select Done to return to the Home screen.
146
SV62250 Rev. G
To Next Page
Loading...
