Connect+® Series Operator Guide
5.
Set the offset value from the right edge and left edge of the envelope using the same
method used for setting the top edge offset. The right margin offset range is 0 to 1.0 inch
(0 to 25.4 mm).
NOTE: The offset values are dependent on the country. This value is for US.
6. Select OK when done.
Changing the Color Print Quality
NOTE: this option is only available if your system has color capability.
1. Ensure that the appropriate job is open and selected on the Run Mail screen.
2. Select anywhere within envelope on the screen.
3. Select the Color print quality option from the list box on the left of the Edit envelope
screen.
4. Select the color ink print quality setting:
l
Good
l
Better
l
Best (slowest printing speed)
5. Select the Envelope material.
l
Regular Wove
l
Recycled
l
Glossy (requires the most drying time)
If you select this ink quality
(step 4):
The following envelope material is
available for selection (step 5):
Good Regular Wove, Recycled.
Regular Wove is selected by default.
86
SV62250 Rev. G
To Next Page
Loading...
