Chapter 3
Return Address
The return address is positioned at the left edge of the envelope.
The return address option allows you to type in a return address. If you use more than one
return address, save each address in a different job.
Changing or Adding a Graphic to a Mail Piece
To change or add a graphic ad that is already downloaded or present on your system:
1. Ensure that the appropriate job is open and selected on the Run Mail screen
2. Select anywhere within envelope on the Run Mail screen. You can also select the Edit
envelope link.
3. Select the Graphic Ad option from the list box.
4. You have several options available for displaying the available graphics. Refer to View-
ing Available Graphics for details.
5. If there is no graphic currently displayed on the envelope, select one of the available
graphic ads displayed on the Edit envelope screen. A check mark appears next to the
graphic you select.
6. To add a graphic, refer to Adding a Graphic.
7. To change the position of the graphic, refer to Positioning a Graphic/Text Message.
8. To remove the graphic, simply deselect it.
9. Select OK when you are done.
10. To verify that the envelope prints correctly, print a sample piece.
Viewing Available Graphics
1.
Select anywhere within the envelope on the Run Mail screen. You can also select the
Edit envelope link.
Select the Graphic ad option from the list box on the left of the Edit envelope screen.
2. The graphic images are displayed in the order in which they have been downloaded,
with the newest appearing first.
3.
If your system has full color capability there will be 3 color filter buttons located directly
71
SV62250 Rev. G
To Next Page
Loading...
