Pitney Bowes Connect+ 1000 - Running a WEIGH-ON-THE-WAY (W-O-W) Job; Loading Mail for a WEIGH-ON-THE-WAY (W-O-W) Job; Running a WEIGH-ON-THE-WAY (W-O-W) - First Piece Only Job

Chapter 3
3. Place the mail piece on the scale. The amount displays next to the Weighing icon.
4. If you are printing on tape, select Tape. If you are printing postage on the mail piece,
place the piece on the feed deck and select Start.
Running a WEIGH-ON-THE-WAY® (W-O-W®) Job
The WEIGH-ON-THE-WAY® (W-O-W®) method increases your productivity by weighing the
piece of mail and applying the correct postage as it travels through the mailing machine. You
do not have to sort your mail by weight before processing.
CAUTION: Do not lean on or disturb the system while it is processing mail in this mode.
It will affect the amount of postage applied to the mail piece.
1. Select theRun Mail button from the Home screen.
2. Select a job that uses WEIGH-ON-THE-WAY® (W-O-W®)or select the Weighing icon.
a. Check to see that the weighing method is set to WEIGH-ON-THE-WAY® (W-O-W®).
If necessary, select the WOW option.
b. Select OK.
3. Put all of the mail on the feed deck.
4. Select Start.
If you prefer to use a different class for mail over a certain weight, you can set the system to
not print postage above that weight. To do this modify the WEIGH-ON-THE-WAY® (W-O-
W®) weight limit.
Loading Mail for a WEIGH-ON-THE-WAY® (W-O-W®) Job
All mail must be same width. Use the side guide to guide the mail into the feeder.
Running a WEIGH-ON-THE-WAY® (W-O-W®) - First Piece Only Job
Use this method if all of the mail pieces in your job are identical, for example, if they all have
the same number of pages in the same size envelope. Since the system only has to weigh
the first piece, this job runs faster.
61
SV62250 Rev. G