Connect+® Series Operator Guide
l
Select Discount if you want to subtract from the postage amount for the piece of
mail or transaction.
b. Select OK.
5. Select Done to apply your changes and return to the Home screen.
Selecting a Surcharge while Running Mail
When you select a surcharge while running mail, it will override global surcharges on your
system (if present). When you close the job, reload the job, or when the batch is ended, the
system will revert to the global surcharge settings for the system.
NOTE: All three global surcharges must be selected in order for the surcharge options to
appear on the Run Mail screen. Refer to Setting Up and Editing Global Surcharge Options
for more information.
Follow the steps below if you want to add, edit or remove a surcharges from the selected job
on the Run Mail screen.
1. Ensure that the appropriate job is open and selected on the Run Mail screen.
2. If you want to edit a specific surcharge, select the surcharge you want to edit in the Job
Properties list box. The Edit surcharge dialog appears.
a. Enter the appropriate value in the field provided.
b. Select how you want the value to be applied.
l
Select Surcharge if you want to add to the cost of the mail piece.
l
Select Discount if you want to subtract from the cost of the mail piece.
c. Select OK to return to the Run Mail screen.
3. If you want to add or remove a surcharge, select Add or remove a surcharge.... The
Apply Surcharges screen appears.
a. Select or deselect the surcharge methods as necessary. A check mark appears in the
check box adjacent to the Surcharge name if it has been selected.If you select a sur-
charge, the Edit surcharge dialog appears.
126
SV62250 Rev. G
To Next Page
Loading...
