Pitney Bowes Connect+ 1000 - Enabling Tracking Services Prompts; Entering the USPS Mailer ID; Internet and Network Settings

Connect+® Series Operator Guide
Enabling Tracking Services Prompts
Use this option to enable tracking service prompts while running mail. You can enable the fol-
lowing prompts:Apply label, Enter customer reference, Enter BPOD for Signature Con-
firmation, Print receipt, Upload records, and Print postal manifest.
1. Select the Settings button on the Home screen.
2. The Settings screen displays. Select Applicationsfrom the list on the left side of the
screen.
3. Select Tracking Services.
4. Select the tracking services prompts you want to appear while running mail. A check
mark indicates that a prompt is selected.
5. Select Done to return to the Home screen.
Entering the USPS® Mailer ID
Follow the steps below to enter and store the Mailer ID on your system.
1. Select the Settings button on the Home screen.
2. The Settings screen displays. Select Applications from the list on the left side of the
screen.
3. Select Tracking Services.
4. Select the Mailer ID field.
NOTE: If you have already entered a Mailer ID while running mail, the ID is saved in this
field. If necessary, you can change the Mailer ID here.
a. Enter the Mailer ID.
b. Select OK.
5. If you want to include the Mailer ID for bulk proof of delivery, select the Include Mailer ID
for Bulk Proof of Delivery check box.
6. Select Done to return to the Home screen.
Internet and Network Settings
The Internet and Network settings allow you to:
161
SV62250 Rev. G