Chapter 3
1. From the Run Mail screen, select the counter button at the bottom of the screen. The but-
ton is labeled either as Resettable counter, or Total pieces depending on the job type.
l
Postal jobs:
a. Total Pieces - the total number of mail pieces and the postage amount for the cur-
rent job.
b. Resettable counter - the total number of pieces run and the total postage amount
since you reset the counter.
l
Seal only jobs:
a. Total Pieces - total number of seal only pieces.
b. Resettable counter - the total number of seal only pieces run since you reset the
counter.
l
Non-postal jobs
1
:
a. Total Pieces - total number of non-postal only pieces.
b. Resettable counter - the total number of non-postal only pieces run since you
reset the counter.
2. You can reset the resettable counter (or clear the batch count) by selecting the Reset to
Zero button.
Adding Graphics, Return Addresses, Messages, and Inscriptions to Your
Mail
You can add customized graphics and logos, messages, and inscriptions on envelopes or
tapes. By adding marketing, advertising, and other promotional messages, you can now
design an outer envelope with content that reinforces the internal message.
You place these images in the Transpromotional zone on the envelope or tape.
1
A job that allows you to print graphic ads, text messages (including return addresses), date and time the mail
piece was received, and date and postage corrections. Non-postal jobs do not print postage.
69
SV62250 Rev. G
To Next Page
Loading...
