Pitney Bowes Connect+ 1000 - System Settings

Connect+® Series Operator Guide
1. Select the Settings button on the Home screen.
2. The Settings screen displays. Select Internet & Network from the list on the left side of
the screen.
3. Select Communication Settings. The IP address, Synchronous port, Asynchronous port,
Host name, Machine ID, and Machine password for the system are displayed. These
fields are automatically populated by Pitney Bowes.
4.
If it is necessary for you to export the communications settings, insert a USB drive into an
available port on the mailing system.
NOTE: The communication settings are typically exported to set up the SendSuite
Xpress™ and Ascent™ interface with the Connect+® Series system.
a. Select Export settings to USBdrive....
b. Select the File name field.
i. Enter the file name.
ii. Select OK.
c. Select the Export to field.
i. Select the folder on the USB drive where you want to export the file.
ii. Select Open.
5. Select OK to export the communication settings.
6. The system will alert you when the export is complete. Select OK.
7. Select Done to return to the Home screen.
System Settings
The System settings allow you to customize your mailing system to meet your needs.
l
Timeouts: Use this feature to set the system timeouts.
l
Clock: Use this feature to synchronize the system clock, set the time zone, and to enable
or disable Daylight Saving time.
l
Automatic Date Advance: Use this feature to set your system to advance the date at the
mail pickup time.
163
SV62250 Rev. G