Chapter 2
NOTE: Key in Postage, Postage Correction and Date Correction jobs cannot be set as the
default job.
Setting the Default Job on the Run Mail Screen
1.
Ensure the job you want to make the default is open and active on the Run Mail screen.
2. Select the Options button.
3. Select Save as default job. the selected job appears on the Default jobs tab. The pre-
vious default job appears on a new tab.
Setting the Default Job on the Jobs Screen
1. Select the Jobs button on the Home screen.
2.
Select the job you want to make the default.
3. Select Options then select Save as default job.The system gives the selected job the
default icon.The job also appears on the Default jobs tab in the Run Mail application.
4. Select OK when done.
Renaming a Job
To rename a job:
1. Select the Open a job tab from within the Run Mail screen, or select the Jobs button on
the Home screen.
2. Select the job you want to rename.
3. Select Options then select Rename job.
4.
Enter the new job name.
5. Select OK when done.
Reloading a Job
The Reload job option allows you to reset an edited or modified job to its original state. Use
this option to discard changes you have made to a job.
On the run mail screen:
32
SV62250 Rev. G
To Next Page
Loading...
