Connect+® Series Operator Guide
Determining the Correct Postage Method
l
If your mail requires no application of postage, see Chart C to choose your job settings.
l
If your mail requires postage, you must determine if you can print directly on your mail.
You can feed mail if your pieces of mail meet the requirements provided in Mail Piece
Specifications. If your mail meets these requirements, select the appropriate postage or
weighing method from Chart A.
l
If your mail does NOT meet the Mail Piece Specifications requirements for direct printing,
you MUST print a postage tape. Select the applicable postage or weighing method from
Chart B.
Chart A - Printing on Mail
If: Then use this method:
You know the amount of postage
needed for your mail.
Key in Postage
You are running postcards. Select the Postage Rate when
selecting the Class.
You do not know the weight of your
piece of mail.
Attached Scale
The pieces of mail are different
weights but fall within the guide-
lines listed above and in the Mail
Piece Specifications topic.
WEIGH-ON-THE-WAY® (W-O-
W®)
All pieces of mail are identical. WEIGH-ON-THE-WAY® (W-O-
W®), first piece only
Your pieces of mail vary in types,
sizes, and/or weights and you have
several you need to process
quickly and efficiently.
Differential weighing with Auto
envelope printing selected
44
SV62250 Rev. G
To Next Page
Loading...
